Loading... Please wait...

BDR-15 Chassis

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
$725.00
Weight:
2.03 LBS
Shipping:
$15.00 (Fixed shipping cost)

 Product Description

Receiver Set

F-1 Firearms BDR-15-3G Receiver Set is a modern take on the MIL-SPEC M16 of yester-year. This set was meticulously engineered to be as lightweight as possible, while remaining rigid and cosmetically pleasing. All areas not inherent to functionality have been stripped away, leaving a beautiful base for any build. Each set is hand finished and matched in-house, for the utmost in operational and cosmetic perfection that our customers have come to expect from us here at F-1. BDR-15-3G sets accept all MIL-SPEC patterned parts as well as Magpul mags.

  • BDR-15-3G matched set
  • Manufactured from high grade 7075-T6 billet aluminum
  • Unnecessary surfaces milled out for lightest reliable configuration
  • Oversized trigger guard
  • Front and rear take down pins included and installed
  • Screws included for bolt catch, receiver tensioning, take-down pin detent and trigger adjustment
  • Black - Type III Class 2 hard anodizing
  • Colors - Type II hard anodizing
  • 60° beveled magwell
  • Produced solely in matched sets and hand finished for the utmost in quality and customer satisfaction
  • F-1 Firearms 100% Product Guarantee
  • Due to current demand, please allow 7-10 business days for shipment
  • Please allow 45-60 days for shipment of color pieces
  • F-1 Firearms' Color Anodizing Disclaimer: We at F-1 Firearms and our 3rd party anodizing partner try our very best to ensure the highest in quality with regards to our color anodizing. However, our color anodizing is low end Type III (0.0002" – 0.0012” in thickness) which can only be expected to withstand normal wear and tear and F-1 Firearms cannot be held liable for longterm fatigue. The color anodizing process is not a 100% color match every time thus it is expected that their will be some slight color variations in the anodizing and F-1 Firearms cannot be held liable for said variations.

Handguard

The F-1 Firearms C7K Contoured Handguard is unique in design in that it comes with a quick placement grip area for ease of repeatability and comfort. The handguard is also much larger in the inside diameter (ID) allowing it to fit most major suppressors within the ID of the rail.

  • Manufactured from 7075-T6 Aluminum
  • 1.65" Inside Diameter
  • Contoured Grip Area to Promote Grip Repeatability and Comfort
  • 1 Piece Free Float Design
  • Aluminum Barrel Nut and Mounting Hardware Included
  • Anti-Rotation Mounting System
  • Full Length Picatinny Rails
  • Type III Class 2 Hard Coat Anodized Finish
  • Scalloped Top Rail 
  • Keymod Side and Bottom Rail Mounts
  • F-1 Firearms 100% product guarantee
  • Due to current demand, please allow 7-10 days for shipment
  • Please allow 45-60 days for shipment of color pieces
  • F-1 Firearms' Color Anodizing Disclaimer: We at F-1 Firearms and our 3rd party anodizing partner try our very best to ensure the highest in quality with regards to our color anodizing. However, our color anodizing is low end Type III (0.0002" – 0.0012” in thickness) which can only be expected to withstand normal wear and tear and F-1 Firearms cannot be held liable for longterm fatigue. The color anodizing process is not a 100% color match every time thus it is expected that their will be some slight color variations in the anodizing and F-1 Firearms cannot be held liable for said variations.

Due to the new laws in California we are not accepting full-build firearm orders placed after 12/08/2016 for customers within California. Chassis and receiver set sales are still available but will be required to be registered as a "featureless rifle". Contact your local FFL dealer for more information.

 Find Similar Products by Category

You Recently Viewed...

 

newsletter

Follow us on

Copyright 2017 F-1 FIREARMS LLC. All Rights Reserved.
Sitemap

Click the button below to add the BDR-15 Chassis to your wish list.